D6 Software and firmware
1.Cura 16.021 Download
3. Cura-15.02.1-MacOS.dmg Download
D6_wanhao_V2.3.hex Note: Change home position. Starting guidance modifed.
D6_wanhao_V2.4.hex Note: Correct Lower buildplate and Raise buildplate.
Fix the current value not match the real value.
D6_wanhao_V2.5.hex Note: Fix the Max Extruder Temperature to 260'C
Fix the Max bed temperature to 115'C
D6_wanhao_V3.1.hex Note: Fix the version bug
Fix the platform lower distance
CURA WANHAO EDITION USER MANUAL
We recommend that new users start with Cura as it includes a slicing engine.
These programs take the 3-Dimensional model (typically STL/OBJ/etc) and determine the 3D printer toolpath based on the options selected. The slicing engine uses the nozzle diameter, printing and movement speeds, layer height and other variables to determine the coordinates where it needs to move and the rates at which it will do so. This information is exported out of the program as a gcode file. The gcode file is a plain-text file with a series of text-based codes and a list of the complete X,Y and Z axis coordinates used for printing the 3D model. We recommend that new users start with Cura as it includes the printer host as well.
Cura is available for download on our website at DOWNLOADING When installing, it is recommended to uninstall any previous versions of Cura you may have been using. When first opening Cura, you will be prompted to go through the First run wizard. This will consist of selecting your printer. It is important to select the correct printer , as Cura uses custom profiles and machines settings based upon which printer you are running.
1.2 Installing Cura
Download Cura on our website and run the exe file.
When you run the exe file, the very First screen you will get is to choose the language as shown below:
After pressing next the next screen will be the installation wizard as below.
Then select the installation folder.
Now Press next to finish the process:
Now you will see the Front screen of Cura with all the options as shown below:
Now go to MACHINE- ADD NEW MACHINE select the machine type you have.
Now press Finish and you will be redirected to the below screen:
WANHAO DUPLICATOR 6 FIRMWARE INSTALLATION
1. Connec the printer with your PC. The installation wizard would install the driver automatically.
2. Navigate to Machine--INSTALL CUSTOM FIRMWARE
3. Select the firmware which you have download from our website. Then press OK.