>> Blue Red
跳过导航链接home > Wanhao Duplicator 7 user manual
Wanhao Duplicator 7 user manual

WANHAO

DUPLICATOR 7

                                

QUICK GUIDANCE                             USER MANUAL                            D7 Software Installation

Resin Information and Sample Settings

The following resin information and recommended print settings are gathered from user submissions. These are just example settings that have been found to print. Use this as a starting point and modify as needed. If you have any recommended settings then please use the Resin Submission Form to give some feedback.

 
Source Average
Cost
Description Layer
Height
Base
Cure time
Layer
Cure time
Profiles Submitted
by

http://www.peediem

odels.com/f2d.php

50 Extremely fast curing and accurate resin that drastically reduces printing time in comparison to other more opaque resins. 65 35 seconds 5 seconds    

http://www.peediem

odels.com/f2d.php

    50 50 8 NanoDLP Pawel

http://www.fun

todo.net/our-distributors.html

$88 USD The Industrial Blend resin has been developed especially for some industrial clients who were in need for a resin that is extra hard and would maintain its structural integrity while exposed to very Low and High temperatures. 100 90 15   James
Because of these properties it is one of the few resins perfectly suitable for vulcanisation. 
For relatively low temperature metals like pewter or tin you can also use the Industrial Blend to print your moulds and cast straight from the printed mould. Read all about it in this Instructable
 
​The hardness of the fully cured resin is 75 shore D.
It has been tested from -45C to +225C.
 
​Available in Red, Black and unpigmented.

http://us.store.

xyzprinting.com/?cateId=0&navId=2

119 Clear is the only XYZ resin tested so far with the D7. 100        
         
They are now offering other resins        
Flexible is $199 1kg        
Castable resin is $269 1KG